Canon F-1, Service Manual

Page: 120 / 179

4
4
4-44
4-44
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Removing the Separation Roller > Procedure
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Removing the Separation Roller > Procedure
Removing the Separation Roller
■ Preparation
1) Removing the Pickup Roller Unit (Refer to page 4-38).
■ Procedure
CAUTION:
Be sure not to touch the surface of the roller when disassembling/assembling.
1) Lift the Original Pickup Tray [1].
[1]
2) Remove the Pickup Guide (Lower) [1] from the lower side of the Original Pickup Tray.
• 2 Screws [2]
x2
[1]
[2]
F-4-109
F-4-110
3) Remove the Separation Roller Unit [1].
• 2 Screws [2]
x2
[1]
[2]
4) Lower the Original Pickup Tray.
5) Remove the Separation Roller [1] and the Roller Shaft [2].
[1] [2]
6) Remove the Roller Shaft [2] from the Separation Roller [1].
• 1 Bearing [3]
[1]
[2]
[3]
F-4-111
F-4-112
F-4-113