4
4
4-52
4-52
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Pullout Roller/Feed Roller 2/Lead Roller 1 > Procedure
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Pullout Roller/Feed Roller 2/Lead Roller 1 > Procedure
3) Remove the Registration Front Inner Guide [1].
• 2 Screws [2]
• Harness Guide [A]
x2
[1]
[1]
[2]
[2]
[A]
Cleaning the Pullout Roller
4) Wipe the Pullout Roller [2] with wet and tightly-wrung lint-free paper [3] by rotating the shaft
[1] of the Feed Roller 2 until it is clean.
[2]
[3]
[1]
F-4-139
F-4-140
Cleaning the Feed Roller 2
5) Wipe the Feed Roller 2 [2] with wet and tightly-wrung lint-free paper [3] by rotating the shaft
[1] of the roller until it is clean.
[1]
[2]
[3]
Cleaning the Lead Roller 1
6) Wipe the Lead Roller 1 [2] with wet and tightly-wrung lint-free paper [3] by turning the Jam
Removal Dial [1] until it is clean.
[1]
[2]
[3]
F-4-141
F-4-142
Summary of Contents for F-1
Page 14: ...2 2 Technology Technology Basic configuration Controls Service Work ...
Page 72: ...3 3 Periodic Servicing Periodic Servicing Periodic Servicing List ...
Page 135: ...5 5 Adjustments Adjustments Overview Adjustment Method ...
Page 175: ...Appendix Service Tools General Circuit Diagram ...
