Canon EOS 250D Page 257 Advanced User'S Manual Download

Page: 257 / 495

257

General Movie Shooting Cautions
Red <

> Internal Temperature Warning Icon

If a red <

> icon appears during movie recording, the card may be hot, so

stop recording the movie and let the camera cool down before removing the

card. (Do not remove the card immediately.)

If the camera’s internal temperature increases due to prolonged movie

shooting or under a high ambient temperature, a red <

> icon will appear.

The red <

> icon indicates that movie shooting will soon be terminated

automatically. If this happens, you will not be able to shoot again until the

camera’s internal temperature decreases. Turn off the power and let the

camera rest for a while.

Shooting a movie at a high temperature for a prolonged period will cause the

> icon to appear earlier. When you are not shooting, always turn off the

camera.

Recording and Image Quality

If the attached lens has an Image Stabilizer and you set the Image Stabilizer

(IS) switch to <

>, the Image Stabilizer will operate at all times even if

you do not press the shutter button halfway. The Image Stabilizer consumes

battery power and may shorten the total movie shooting time depending on

the shooting conditions. When the Image Stabilizer is not necessary, such as

when using a tripod, it is recommended that you set the IS switch to <

The camera’s built-in microphones will also record the operation sound and

mechanical sound of the camera during shooting. Using the Directional

Stereo Microphone DM-E1 (sold separately) may reduce these sounds in the

movie.

Do not connect anything other than an external microphone to the camera’s

external microphone IN terminal.

If the brightness changes during autoexposure movie shooting, the movie

image may freeze temporarily. In such a case, shoot movies with manual

exposure.

If there is a very bright light source in the image, the bright area may appear

black on the LCD monitor. The movie will be recorded almost exactly as it

appears on the LCD monitor.

In low light, noise or irregular colors may appear in the image. The movie will

be recorded almost exactly as it appears on the LCD monitor.

If you play back a movie with other devices, image or sound quality may

decline or playback may not be possible (even if the devices support MP4

format).

Summary of Contents for EOS 250D
















































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands

Canon EOS 250D, Advanced User'S Manual

Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands