Canon EOS 250D Page 243 Advanced User'S Manual Download

Page: 243 / 495

243

Do not point the camera toward an intense light source, such as the sun or an

intense artificial light source. Doing so may damage the image sensor or the

camera’s internal components.

Time-lapse movies cannot be recorded when the camera is connected to a

computer with the interface cable, or when an HDMI cable is connected.

Movie Servo AF will not function.

Do not zoom the lens during time-lapse movie shooting. Zooming the lens

may cause the image to be out of focus, the exposure to change, or the lens

aberration correction not to function properly.

During time-lapse movie shooting, auto power off will not take effect. Also,

you cannot adjust the shooting function and menu function settings, play back

images, etc.

Sound is not recorded for time-lapse movies.

With

[Interval]

set to less than 3 sec. and

[Auto exposure]

set to

[Each

frame]

, if the brightness differs greatly from the preceding shot, the camera

may not shoot at the set interval.

Movie digital IS is not available.

If the time it takes to record to the card exceeds the interval between shots

due to the shooting functions set or card performance, some of the shots may

not be taken with the set intervals.

If you connect the camera to a computer with an interface cable and use EOS

Utility (EOS software), set

[

: Time-lapse movie]

[Disable]

. If an option

other than

[Disable]

is selected, the camera cannot communicate with the

computer.

During time-lapse movie shooting, the lens’s Image Stabilizer will not operate.

Time-lapse movie shooting ends if the power switch is set to <

>, for

example, and the setting is changed to

[Disable]

Even if a flash is used, it will not fire.

The following operations cancel standby for time-lapse movie recording and

switch the setting to

[Disable]

Selecting either

[Clean now

]

under

[

: Sensor cleaning]

or selecting

[Clear all camera settings]

under

[

: Clear settings]

Turning the Mode Dial.

If you start time-lapse movie shooting while the white <

> temperature

warning (

215) is displayed, the image quality of the time-lapse movie may

decline. It is recommended that you start time-lapse movie shooting after the

white <

> disappears (camera’s internal temperature decreases).

Summary of Contents for EOS 250D
















































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands

Canon EOS 250D, Advanced User'S Manual

Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands