419
Geotagging Images with GPS
Information from Other Devices
You can geotag images with GPS Receiver GP-E2 (sold separately) or a
Bluetooth enabled smartphone.
GP-E2
1
Attach the GP-E2 to the camera.
z
Attach GP-E2 to the camera’s hot shoe
and turn it on. For details, refer to the
GP-E2 Instruction Manual.
2
Select [GPS device settings].
z
Under the
[
k
]
tab, select
[GPS device
settings]
, then press <
0
>.
3
In [Select GPS device], select [GPS
receiver].
4
Take the picture.
z
For the details of
[Set up]
, refer to the
GP-E2 Instruction Manual.
Cautions for Using GP-E2
z
At first, check the countries and regions where the use of GPS is allowed, and
follow their legal restrictions.
z
Update the GP-E2 firmware to Version 2.0.0 or later. Firmware updating
requires an interface cable. For how to update the GP-E2 firmware, refer to
the Canon website.
z
The cable cannot be used to connect the camera to the GP-E2.
z
The camera does not record the shooting direction.