Canon EOS 250D Page 91 Advanced User'S Manual Download

Page: 91 / 495

Cautions for <

> Group Photo

Since distortion correction is applied, the camera records an image area

narrower than the one seen through the viewfinder. (The image periphery is

slightly trimmed and the resolution looks slightly lowered.) Also, during Live

View shooting, the angle of view changes slightly.

Cautions for <

> Kids

During Live View shooting, if flash is fired in continuous shooting, the

continuous shooting speed will decrease. Even if the flash is not fired

for subsequent shots, shooting will still be performed with the decreased

continuous shooting speed.

Cautions for <

> Night Portrait and <

> Handheld Night Scene

During Live View shooting, achieving focus may be difficult with point sources

of light, such as may be found in a night scene. In such a case, set the lens’s

focus mode switch to <

> and focus manually.

The Live View image displayed will not look exactly the same as the actual

captured image.

Cautions for <

> Night Portrait

During Live View shooting, achieving focus may be difficult when the face of

the subject looks dark. In such a case, set the lens’s focus mode switch to

> and focus manually.

Cautions for <

> Handheld Night Scene and <

> HDR Backlight

Control

RAW image quality cannot be set.

If you shoot a moving subject, the subject’s movement may leave

afterimages, or the surrounding area of the subject may become dark.

The image alignment may not function properly with repetitive patterns

(lattice, stripes, etc.), flat or single-tone images, or images significantly

misaligned due to camera shake.

It takes some time to record images to the card since they are merged

after shooting. During the image processing, “

buSy

” will be displayed in

the viewfinder, and you cannot take another picture until the processing is

complete.

Summary of Contents for EOS 250D
















































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands

Canon EOS 250D, Advanced User'S Manual

Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands