Canon EOS 250D Page 36 Advanced User'S Manual Download

Page: 36 / 495

Tips for Using the Battery and Charger

Upon purchase, the battery is not fully charged.

Charge the battery before use.

Recharge the battery on the day before or on the day it is to be

used.

Even during storage, a charged battery will gradually drain and lose its

capacity.

After recharging the battery, detach it and disconnect the charger

from the power outlet.

When not using the camera, remove the battery.

If the battery is left in the camera for a prolonged period, a small

amount of power current will keep being released, resulting in excess

discharge and shorter battery life. Store the battery with the protective

cover (provided) attached. Storing the battery when it is fully charged

may lower the battery performance.

The battery charger can also be used in foreign countries.

The battery charger is compatible with a 100 V AC to 240 V AC 50/60

Hz power source. If necessary, attach a commercially-available plug

adapter for the respective country or region. Do not attach any portable

voltage transformer to the battery charger. Doing so may damage the

battery charger.

If the battery becomes exhausted quickly even after having been

fully charged, the battery has reached the end of its service life.

Check the battery’s recharge performance (

460) and purchase a

new battery.

After disconnecting the charger’s power plug, do not touch the prongs for

approx. 5 sec.

Do not charge any battery other than a Battery Pack LP-E17.

Battery Pack LP-E17 is dedicated to Canon products only. Using it with an

incompatible battery charger or product may result in malfunction or accidents

for which Canon cannot be held liable.

Summary of Contents for EOS 250D
















































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands

Canon EOS 250D, Advanced User'S Manual

Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands