429
11: Connection target not found
z
In the case of
[
q
]
, is Camera Connect running?
B
Establish a connection using Camera Connect (
z
In the case of
[
D
]
, is the EOS software running?
B
Start the EOS software and reestablish the connection (
z
In the case of
[
l
]
, is the power of the printer on?
B
Turn on the printer.
z
Are the camera and the access point set to use the same password for
authentication?
B
This error occurs if the passwords do not match when the
authentication method for encryption is set to
[Open system]
.
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct password for authentication is
12: Connection target not found
z
Is the power of the target device and access point on?
B
Turn on the target device and access point, then wait a while. If a
connection still cannot be established, perform the procedures to
establish the connection again.
