Canon Eos 1ds mark ii Software Instruction Manual Download Page 141

Page: 141 / 228

Downloading Images

M-17

ork

ing wit

h Images in

S Viewer Ut

ilit

Supported Image Formats

The following images can be displayed in EOS Viewer Utility.

•

RAW and JPEG images shot on an EOS DIGITAL series (1D Mark II, 1Ds, 1D, 10D, D60,
D30, DIGITAL REBEL/300D DIGITAL) camera

•

TIFF and JPEG images saved in EOS Viewer Utility (M-45)

•

DCF-compliant JPEG images

Images that cannot be displayed appear as a question mark [?].

Click the copied folder.



The images in the folder are

displayed.



Before disconnecting the camera

from the computer, quit EOS
Viewer Utility, set the camera’s

power switch to <OFF>, and then

disconnect the dedicated cable.



You cannot display images in the preview window (M-20) or edit RAW images (M-29)
saved on a memory card in the camera directly. Before working images with EOS
Viewer Utility, be sure to download images saved on a memory card to your
computer.



For displaying images saved in a third-party card reader, follow the same procedure
to download the target folder to your computer.



The images that are processed on your computer after being shot or the images
whose file name is changed may not be displayed properly.



You cannot use the camera while displaying images on the camera.



Images that were shot with the camera held vertically with [Auto rotate] setting to
<ON> are automatically displayed vertically.



If the selected folder contains a large number of images, there may be a short delay
before the images appear.

Summary of Contents for Eos 1ds mark ii





































































































































































































































Search results

Summary of Contents for Eos 1ds mark ii

Reviews:

Related manuals for Eos 1ds mark ii

Brands by name

Popular brands

Canon Eos 1ds mark ii, Software Instruction Manual

Search results

Summary of Contents for Eos 1ds mark ii

Reviews:

Related manuals for Eos 1ds mark ii

Brands by name

Popular brands