Canon EOS 100D Basic Instruction Manual Download Page 81

Page: 81 / 533

Using AF to Focus (AF Method)

The camera focuses with a single AF point. This is effective when you
want to focus a particular subject.

Display the Live View image.

Press the <

> button.

The Live View image will appear on
the LCD monitor.

The AF point < > will appear.

During movie shooting, if [

Movie

Servo AF

] is set to [

Enable

], the AF

point will be displayed in a larger size.

Move the AF point.

Press the <

> cross keys to move the

AF point to where you want to focus. (It
cannot go to the edges of the picture.)

To return the AF point to the center,
press the <

> button.

You can also tap the LCD monitor
screen to move the AF point.

Focus the subject.

Aim the AF point over the subject and
press the shutter button halfway.

When focus is achieved, the AF point will
turn green and the beeper will sound.

If focus is not achieved, the AF point
will turn orange.

Take the picture.

Check the focus and exposure, then
press the shutter button completely to
take the picture (p.74).

FlexiZone - Single:

AF point

Summary of Contents for EOS 100D






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 100D

Reviews:

Related manuals for EOS 100D

Brands by name

Popular brands

Canon EOS 100D, Basic Instruction Manual

Search results

Summary of Contents for EOS 100D

Reviews:

Related manuals for EOS 100D

Brands by name

Popular brands