Canon EOS 100D Basic Instruction Manual Download Page 322

Page: 322 / 533

Shooting Video Snapshots

206

Save the edited album.

Press the <

> button to return to

the Editing panel at the screen’s
bottom.

Select [

] (Save), then press

The save screen will appear.

To save it as a new movie, select
[

New file

]. To save it and overwrite

the original movie file, select
[

Overwrite

], then press <

Provided Software Usable with Albums

EOS Video Snapshot Task:

Enables the editing of albums. This add-on

function for ImageBrowser EX is automatically downloaded from the
Internet using the auto update function.

If he card does not have enough free space, [

New file

] will not be

available.

When the battery level is low, editing albums is not possible. Use a fully-
charged battery.

Summary of Contents for EOS 100D






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 100D

Reviews:

Related manuals for EOS 100D

Brands by name

Popular brands

Canon EOS 100D, Basic Instruction Manual

Search results

Summary of Contents for EOS 100D

Reviews:

Related manuals for EOS 100D

Brands by name

Popular brands