Canon EOS 100D Basic Instruction Manual Download Page 52

Page: 52 / 533

Full Auto Techniques (Scene Intelligent Auto)

You can shoot while viewing the image on the LCD monitor. This is
called “Live View shooting”. For details, see page 73.

Display the Live View image on
the LCD monitor.

Press the <

> button.

The Live View image will appear on
the LCD monitor.

Focus the subject.

Press the shutter button halfway to
focus.

When focus is achieved, the AF point
will turn green and the beeper will
sound.

Take the picture.

Press the shutter button completely.

The picture will be taken and the
captured image is displayed on the
LCD monitor.

After the image review ends, the
camera will return to Live View
shooting automatically.

Press the <

> button to end the

Live View shooting.

Live View Shooting

Summary of Contents for EOS 100D






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 100D

Reviews:

Related manuals for EOS 100D

Brands by name

Popular brands

Canon EOS 100D, Basic Instruction Manual

Search results

Summary of Contents for EOS 100D

Reviews:

Related manuals for EOS 100D

Brands by name

Popular brands