background image

6-7

Chapter 6   Practical Examples

Documents Do Not Feed Properly

If a document does not feed properly, first confirm the 
following:

Are pages sticking together because of static electricity 
or another cause?

Are you attempting to scan a document with size, paper 
thickness or quality that is not supported by the 
scanner? 

(See “Documents” on p. 3-3.)

Are the feed rollers dirty?

Are the feed rollers worn out?

IMPORTANT

• Double feeding occurs when document pages stick together, 

and incompatible paper thickness or quality can cause paper 
jams. Check your documents carefully before loading.

• Replacement rollers can be purchased as consumables. If 

performance is not improved after cleaning the rollers, contact 
your local Canon dealer or service representative to purchase 
a Roller Replacement Kit, and replace the rollers (pickup, feed 
and retard rollers). 

(See “Replacing the Transport Rollers” on 

p. 5-5.)

If this does not solve the problem, consider the following 
possible problems and causes:

Problem

Documents do not feed.

Cause

The Continuous Manual Feed Mode is 
enabled.

Solution

Set the Continuous Manual Feed Mode to 
[OFF] from the User Mode. 

(See “Continuous 

Manual Feeding Mode Setting” on p. 3-12.)

Saved Image Files Do Not Open

If image files saved by CapturePerfect 3.0 cannot be 
opened by another application, first confirm the following:

Does the application you are using support 
CapturePerfect 3.0 image file types (*.bmp, *.tif, *.jpg 
and *.pdf)?

If this does not solve the problem, consider the following 
possible causes:

Cause

The application does not support multi-
page TIFF files.

Solution

Open the files using an application that 
supports multi-page TIFF files, or save the 
images as single-page TIFF files using 
CapturePerfect 3.0.

Cause

The compression format used by 
CapturePerfect 3.0 is not supported.

Solution

Open the image file with CapturePerfect 3.0, 
set the compression format to [None], and save 
it again.

Scanning Results Are Not as Expected

If the scanned images do not appear as expected, one or 
more ISIS/TWAIN driver settings may be incorrect, or 
your application may not support certain scanner 
functions.

Problem

The scanned image is too dark (or faint).

Cause

The [Brightness] setting is not set to an 
appropriate value.

Solution

If the image is too dark, set a higher brightness 
setting, or if the image is too faint, set a lower 
brightness setting.

Summary of Contents for DR-9050C - imageFORMULA - Document Scanner



























































































































































Reviews: