OSD Menu
53
Sub Menu
Setting Options (Bold: factory default)
Channel Order
Normal
Grouping
Sets the order of channels.
[Normal]: Odd-numbered channels are shown on the left side, even-
numbered channels on the right side “([1, 3, 5, 7] etc.) on the left, ([2, 4,
6, 8] etc.) on the right”.
[Grouping]: Channels are shown in sequence on the left and right sides “([1,
2, 3, 4] etc.) on the left, ([5, 6, 7, 8] etc.) on the right”.
Size
Large
Small
Sets the size of the display.
• When [Channel Number (SDI)] is [16CH], and [Single Input Dual View] or [Multi
Information View] is selected, this setting is invalid.
Position
Normal
Left
Selects the display position.
[Normal]: Displays the audio level meter on both ends.
[Left]: Indication on the right side is displayed toward the center of the
screen. This prevents the indication from overlapping with the banner.
• When [Multi Information View] is selected, this setting is invalid.
Peak Hold
On
, Off
One second of audio signal at the peak is kept.
Reference Level
-40 to 0 (
-20
)
Sets the reference level.
Brightness
Normal
Low
Half
Sets brightness for the audio level meter.
Wave Form Monitor
1
Configures various settings for the wave form monitor. On the wave form monitor, the horizontal axis
shows the horizontal resolution of the video and the vertical line shows the signal level. To the right of
the wave form monitor, [Color Range] and [HDR Range] information (vertical line) is displayed.
Signal level
Horizontal resolution of video
Enable
On,
Off
Switches the wave form monitor On, Off.
Select Signal
Y
, Cb, Cr, R, G, B,
YRGB
Sets the waveform to be displayed.
• When one of [R], [G], [B] or [YRGB] is selected, the non-constant value is
displayed even if [2020 Constant Luminance] is set to [Constant].
