OSD Menu
38
Sub Menu
Setting Options
Format
SDI Signal
Automatic
4:2:2 YCbCr 10-bit
4:2:2 YCbCr 12-bit
4:4:4 YCbCr 10-bit
4:4:4 YCbCr 12-bit
4:2:2 ICtCp 10-bit
4:2:2 ICtCp 12-bit
4:4:4 ICtCp 10-bit
4:4:4 ICtCp 12-bit
4:4:4 RGB 10-bit
4:4:4 RGB 12-bit
4:4:4 XYZ 10-bit
4:4:4 XYZ 12-bit
HDMI Signal / Multi
View
Automatic
Sets the color format and gradation.
[Automatic]: Sets automatically to match the input signal.
• The HD-SDI signal is either [4:2:2 YCbCr 10-bit] or [4:2:2 ICtCp 10-bit].
• If [Automatic] is selected, they are rendered in a Payload that is selected in the
order A
→
B
→
C
→
D. When [Input Configuration] [Multi View] is selected, SDI
signals and HDMI signals can be displayed in different formats (except ICtCp/
XYZ).
• The settings for correctly displaying ICtCp format signals are as follows.
- [Picture Mode]: [ITU-R BT.709] or [ITU-R BT.2020]
- [Color Gamut]: [ITU-R BT.709] or [ITU-R BT.2020]
- [Gamma/EOTF]: [SMPTE ST 2084 (PQ)] or [Hybrid Log-Gamma]
• If you need to use the ICtCp format for SDI signals, select any of the following to
match the signal: [4:2:2 ICtCp 10-bit], [4:2:2 ICtCp 12-bit], [4:4:4 ICtCp 10-bit],
[4:4:4 ICtCp 12-bit]
• To use 4:4:4 XYZ 10-bit for SDI signals, select [4:4:4 XYZ 10-bit]. Then, signals
will be processed as signals where XYZ data is included in RGB data output in
4:4:4 RGB 10-bit format.
• With SDI signals, when [Color Gamut] is set to [Cinema Gamut to XXX] or
[S-GamutXXX], or when [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or
[Canon Log 3], operation changes as follows according to the color format.
-
ICtCp/RGB:
Operates as YCbCr
-
XYZ:
Operates as RGB
Audio Input
[Select Input Signal]
When [Quad Input]
Automatic, Input A,
Input B, Input C, Input D
When [Dual Input A,B]
Automatic, Input A,
Input B
When [Dual Input C,D]
Automatic, Input C,
Input D
Sets the audio terminal.
[Automatic]: Sets automatically to match the input signal.
• For [Select Input Signal] [Automatic] or [Single Input], it is fixed at [Automatic].
• When [Input Configuration] [Multi View] is selected, the list of terminals set in
[Screen A to D] is displayed and can be set.
Switch Out
This function can be used by applying a paid license.
Configures various settings for Switch Out. The signal is output from the MULTI FUNC. OUT terminal.
Select Output Signal
Automatic
SDI Input A
SDI Input B
SDI Input C
SDI Input D
Off
[Automatic]: Automatically detects the terminals that have inputs or are
displayed, and outputs their signals.
[SDI Input A], [SDI Input B], [SDI Input C], [SDI Input D]: Outputs the SDI
Input A to D signals.
[Off]: No output.
• When the [Select Output Signal] setting is changed, the output may be
temporarily disrupted or stopped.
Output Signal Marker
White
Red
Green
Off
When [Image Division] is set to [Multi View (Quad)] or [Multi View (Dual)],
displays a frame in the selected color for the signal to be switched out.
