Canon DP-V2730 Operation Manual Download Page 97 | Manualshive

Page: 97 / 106

background image

97

Troubleshooting

Symptom

Cause and Action

Power does not turn on.
(Power indicator does not turn on.)

•  Press the   button.
•  Check that the power cord is connected correctly.
•  Brightness of the power indicator may be turned off. Turn it on and

check once more.

—

The screen is dark.

When the power indicator does not turn on:
• Press the button.
• Check that the power cord is connected correctly.

—

When the power indicator is lit orange:
• Press the button.

—

When the power indicator is flashing orange:
• Flashing once every 3 seconds : Contact Canon Customer Center.
• Flashing twice every 3 seconds :

- Turn on the power with the button.
- The temperature of the display rises (or falls) depend on operation

environment. Check the environmental conditions and do not use in
direct sunlight.

- If the power still does not turn on, contact Canon Customer Center.

—

The power was turned off when there
were not any signals.

When [Power Save] is set to an option other than [Off], the video display’s
power is automatically turned off if the no video signal is input for a certain
period of time. Turn on the power again.

The power suddenly goes off when a DC
power supply is used.

• Depending on the model of DC power supply used, the output voltage

may decrease suddenly and even turn off (0 V output) when a threshold
value is reached. Before that, a warning message about low input
voltage may be displayed only briefly or not at all. Connect a charged
DC power supply or AC power supply.

—

The image does not display.

• Set each item in [Channel Settings] according to input signal.

There is a blank area when set to Quad
Input/Dual Input.

• There may be no input signal. Check the signal.
• Some combinations are not supported. Check the signal.

The image appears to be delayed.

• When [Reduce Backlight Flash] is set to [On], the displayed image may

be delayed depending on the scene. In such case, change the setting to
[Off].

Screen is too bright/dark.

• Adjust the [Luminance] on the OSD menu.
• There is a limit on the service life of LCD backlight. If the screen

becomes dark or starts flickering, contact Canon Customer Center.

«
...
95
96
97
98
99
...
»

Summary of Contents for DP-V2730











































































































Reviews:

No comments

Related manuals for DP-V2730

Brand: TE Connectivity Pages: 13

225BW - SyncMaster - 22" LCD Monitor

Brand: Samsung Pages: 65

225UW - SyncMaster - 22" LCD Monitor

Brand: Samsung Pages: 59

2243WM - SyncMaster - 22" LCD Monitor

Brand: Samsung Pages: 19

2233RZ - Syncmaster 22" 3D Gaming LCD Monito

Brand: Samsung Pages: 13

2233RZ - Syncmaster 22" 3D Gaming LCD Monito

Brand: Samsung Pages: 15

2233BW - SyncMaster - 22" LCD Monitor

Brand: Samsung Pages: 15

2233BW - SyncMaster - 22" LCD Monitor

Brand: Samsung Pages: 15

2220WM - SyncMaster - 22" LCD Monitor

Brand: Samsung Pages: 48

215TW - SyncMaster - 21" LCD Monitor

Brand: Samsung Pages: 78

214T - SyncMaster - 21.3" LCD Monitor

Brand: Samsung Pages: 79

214T - SyncMaster - 21.3" LCD Monitor

Brand: Samsung Pages: 87

2053BW - SyncMaster - 20" LCD Monitor

Brand: Samsung Pages: 13

204B - SyncMaster - 20.1" LCD Monitor

Brand: Samsung Pages: 76

2032NW - SyncMaster - 20" LCD Monitor

Brand: Samsung Pages: 53

2.0081006091109e16

Brand: Samsung Pages: 35

2.0080828210016e16

Brand: Samsung Pages: 21

191T - SyncMaster 19" LCD Monitor

Brand: Samsung Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands