OSD Menu
41
Sub Menu
Setting Options (Bold: factory default)
HDR Range
Sets the display method when Gamma for HDR display is selected.
Canon Log (HDR)
100 to
800
Sets the [Canon Log] dynamic range to be displayed, from 0 to 800%. (in
100 increments)
Canon Log 2 (HDR)
100 to
1600
Sets the [Canon Log 2] dynamic range to be displayed, from 0 to 1600%.
(in 100 increments)
Canon Log 3 (HDR)
100 to
1600
Sets the [Canon Log 3] dynamic range to be displayed, from 0 to 1600%.
(in 100 increments)
SMPTE ST 2084 (PQ)
100 to 10000 (
1000
)
Sets the [SMPTE ST 2084 (PQ)] dynamic range to be displayed, from 0.005
to 10,000 cd/m
2
(nits). (in 100 increments)
Hybrid Log-Gamma
100 to
1000
/2000/4000 Sets how far to display the [Hybrid Log-Gamma] dynamic range.
(in increments of 100)
The upper limit value will change to match the settings of [Hybrid Log-
Gamma System]. (
Hybrid Log-Gamma
RGB
100 to
1000
/2000
Preset Log 1
100 to 1400 (
1000
)
Sets how far to display the [Preset Log] dynamic range. (in 100
increments)
Preset Log 2
100 to 3900 (
1000
)
Gamma LUT 1 to
Gamma LUT 8
512 to
1023
Sets how far to display the 10-bit LUT data dynamic range, from 0 to
1023. (in 1 increments)
Setting procedures
The explanation uses [SMPTE ST 2084 (PQ)] as an example.
When set at “1000,” those areas that exceed 1,000 cd/m
2
are clipped, and those that are 1,000 cd/m
2
or below are assigned
to the dynamic range of the video display. When displaying an image with a PQ of 1,000 cd/m
2
, you can check the entire
dynamic range of the image. Also, when displaying an image with a PQ of 2,000 cd/m
2
, you can check the image up to
1,000 cd/m
2
.
When set at “2000,” those areas that exceed 2,000 cd/m
2
are clipped, and those that are 2,000 cd/m
2
or below are assigned
to the dynamic range of the video display. When displaying an image with a PQ of 2,000 cd/m
2
, although the apparent
brightness lowers, you can still check all the dynamic range of the image.
The brightness of the video display corresponds to the value set for Contrast.
2,000 cd/
㎡
1,000 cd/
㎡
2,000 cd/
㎡
1,000 cd/
㎡
1,000 cd/
㎡
SMPTE ST 2084 (PQ) 2,000 cd/m
2
signal
(Contrast: [10000])
SMPTE ST 2084 (PQ): Set to [2000]
SMPTE ST 2084 (PQ): Set to [1000]
SMPTE ST 2084
range
SMPTE ST 2084
range
DP-V2411
range
DP-V2411
range
Gradation is reproduced by assigning
the range to the range of the
DP-V2411 (which
lowers the
brightness).
Clip (Saturates gradation.)
Brightness value
corresponding to
the contrast setting
