Operating the Video Display
33
Operating the video display using an external device [LAN terminal]
The video display supports Television Systems Ltd.’s “TSL UMD Protocol Ver. 5.0”. You can operate the video display
using an external device connected to the LAN terminal and display characters and tally lights on the screen. There are
two tally lights, on the left and right. Up to 16 characters can be entered. The following characters can be entered.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: , . : ; ‘ ` - + / = % & ! ? # _ | $ ^ ~ @ { } [ ] < > ( ) and spaces
Tally display (left)
Character display
Tally display (right)
1 Connect an external control device to the LAN terminal.
2 Set [SCREEN] and [INDEX] to [0x0000] in the TSL Protocol settings.
3 Open the [In Monitor Display] menu.
[System Settings] [Network/IMD/Remote(GPI) Settings] [In Monitor Display]
4 Select [Control]
[TSL Ver. 5.00] using the jog dial.
•
This will allow operation from an external control device, and display characters and tally lights.
5 Select [Position] [Top] or [Bottom] using the jog dial.
•
This sets the position where characters and tally lights will be displayed.
Note
•
When [Multi View (Dual)] or [Multi View (Quad)] is displayed, set the [INDEX] setting to from [0x0001] to [0x0004].
•
The port number for the controlling is fixed at "45000".
•
With [In Monitor Display] you can also display user-selected characters on the screen. (
