Chapter 3
3-58
F-3-217
3) Remove the 2 screws [4] and the stepped
screw [5]; then, detach the feed motor
[6] together with the adjusting plate [7].
F-3-218
3.4.9.8
Detaching the
Timing Belt and the
Pulley
0007-5782
1) Disconnect the 2 connectors [1], and
remove the screw [2] and grounding
fixing screw [3]; then, slide the harness
guide slightly to the left, and lift it.
F-3-219
2) Remove the 4 screws [4] and the other
screw [5]; then, detach the left hinge
unit.
F-3-220
3) Remove the screw [6], and detach the
original placement sensor [7] together
with the bracket; then, disconnect the
connector [8].
[3]
[5]
[7]
[4]
[6]
[4]
[1]
[3]
[2]
[4]
[5]
Summary of Contents for DADF-N1
