Canon DADF-N1, Service Manual

Page: 125 / 199

Chapter 3
3-53
F-3-197
Loosen the screw [26] of the tension
arm [25]; then, force the arm clockwise
to mount it. When you have attached the
timing belt [23], tighten the screw [26].
F-3-198
3.4.8.9 Removing the
Feeder Unit
0007-2840
1) Remove the screw [1], and pull out the
busing [2]; then, detach the original
pickup tray [3].
F-3-199
2) Remove the 2 screws [4] on the front
cover side; then, remove the locking
support [5], and disconnect the
connector [6].
F-3-200
3) Disconnect the sensor connector [7].
4) Remove the 2 screws [8], and detach the
[22]
[21]
[24]
[23]
[23]
[25]
[26]
[3]
[1]
[2]
[4]
[6]
[5]