![background image](http://html.mh-extra.com/html/canon/dadf-n1/dadf-n1_service-manual_62284041.webp)
F-2-14
2.3.4
Original Size Initial Identification (feed direction)
0006-2257
In original size initial identification (feed direction), the machine uses the length sensor 1
(PI6) and the length sensor 2 (PI7) to find out the length of the original placed in the original
tray in feed direction.
When an original is placed in the original tray, the detecting levers of the 2 length sensors
operate in conjunction with the light-blocking plate, which blocks the light to the
photointerrupter. The machine uses the combination of the levels of the signals (LENG1S,
LENG2S) from these 2 sensors to identify the size of the original based on the table of
original widths discussed later. The result of identification is then communicated to the host
machine on a real-time basis.
The following is an outline of the relationships between the signals of the length sensors
and the original widths in relation to the original sizes that will be identified:
ADF controller PCB
Original
Detecting
lever
ENDS
EMPS
PI9
PI8
Chapter 2
2-1
9
Summary of Contents for DADF-N1
