manualshive.com logo in svg

Canon D1100 Series, Service Manual

Share
Download
Canon D1100 Series Service Manual Download Page 213

8

8

8-26

8-26

Service Mode > Test Mode (Test) > Overview > Outline

Service Mode > Test Mode (Test) > Overview > Outline

Data Initialization Mode (Clear)

Clear

Group

Item

Explanation

TEL & USER DATA

Clears all user-registered and -set areas of telephone 
registration data and user data.  (Telephone registration 

refers to the registration of codes on one-touch dialing, 

abbreviated dialing, and group dialing.)

SERVICE DATA

Clears the system dump list, except for counters and clear 

dates.

COUNTER

Clears the maintenance counter, parts counter and mode-

specific counters.

Initializes the counter (numerator) in the system dump list.

TYPE

Initializes user data and service data to suit specified 

destination settings.

SOFT-CNT

Not used

HST

ACTIVITY

Initializes the activity report

ACCOUNT

Not used

JAM

Not used

ERR

Not used

ALARM

Not used

CARD

Not used

ERR

E355

Not used

E719

Not used

PWD

Clears the system administrator's password. 

FILE SYSTEM

Not used

FORMAT

USB MEMORY Format the USB memory. (This mode is used when the USB 

memory error is damaged and E744 occurs.)

LICENSE DRIVE

Not used

ERDS-DAT

Not used

ALL

Clears user and service data (except for some scan 

parameters and print parameters), and the counter setting/

registration data in the system dump list, except for the print 

count.

T-8-42

T-8-42

Rom Management (Rom)

ROM Display

The table below lists the items of ROM display mode that are supported.

Item

Explanation

MAIN

Displays the version number of the ROM (SYSTEM) mounted on the image 

processor PCB.

MAIN2

Displays the version of the ROM (BOOT) mounted on the image processor PCB.

ECONT

Displays the version number of the ROM mounted on the DC controller PCB.

OPROM

Not used

Test Mode (Test)

Overview

Outline

Test mode must be executed by keeping track the flow of menu items appearing on the LCD.  
Menu items in test mode are organized into seven blocks as described below.  Numerals 

enclosed in parentheses denote a numeric keypad key to be pressed each.

1. D-RAM test ((1) D-RAM)

Checks to see if data can be correctly written to and read from D-RAM.

2. Scan test ((2) SCAN TEST)

Used to adjust contact sensor output and the position at which a document fed 

from the ADF is scanned.

3. Print test ((3) PRINT TEST)

Used to generate service test patterns.

4. Modem test ((4) MODEM TEST)

Performs relay actuation, modem DTMF and tonal signal transmission/reception tests.

5. Aging test ((5) AGING TEST)

Not used.

6. Function test ((6) FUNCTION TEST)
Used to verify the operations of microswitches, sensors, speakers and ADF functions.
7. Roller cleaning mode ((0) ROLLER CLEAN)
Used to clean the delivery roller or ADF pickup roller by idling them.

■

T-8-43

T-8-43

Summary of Contents for D1100 Series




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands