7
7
7-2
7-2
Error Codes > Error Code
Error Codes > Error Code
Error Code
Display
Code
Detail
Code
Main Cause/Symptom
Countermeasure
E000
0
Startup error
The temperature detected by the main
or sub thermistor does not rise to the
specified value during startup control.
- Check the fixing film connector.
- Replace the fixing film unit.
- Replace the Engine controller PCB.
E001
0
Abnormally high temperature (detected by main thermistor)
The main thermistor detected an
abnormally high temperature during
temperature control.
- Check the connector of the fixing film
unit.
- Replace the fixing film unit.
- Replace the Engine controller PCB.
1
Abnormally high temperature (detected by sub thermistor)
The sub thermistor detected an
abnormally high temperature during
temperature control.
- Check the connector of the fixing film
unit.
- Replace the fixing film unit.
- Replace the Engine controller PCB.
E002
0
Low temperature during temperature control.
The target temperature is not reached
during temperature control.
- Check the connector of the fixing film
unit.
- Replace the fixing film unit.
- Replace the Engine controller PCB.
E003
0
Abnormally low temperature (detected by main thermistor)
After the temperature detected by
the main thermistor has reached the
specified value, it does not reach the
specified value during initial rotation.
- Check the connector of the fixing film
unit.
- Replace the fixing film unit.
- Replace the Engine controller PCB.
1
Abnormally low temperature (detected by sub thermistor)
After the temperature detected by
the sub thermistor has reached the
specified value, it does not reach the
specified value during initial rotation.
- Check the connector of the fixing film
unit.
- Replace the fixing film unit.
- Replace the Engine controller PCB.
E010
0
Main motor failure
The main motor is faulty.
- Check the connector of the main
motor.
- Replace the main motor.
- Replace the Engine controller PCB.
E100
0
BD detection PCB failure
The BD detection PCB is faulty.
- Replace the laser scanner unit.
- Replace the Engine controller PCB.
Display
Code
Detail
Code
Main Cause/Symptom
Countermeasure
E196
1
Flash ROM write/read error
- Replace the Main Controller Board.
The write/read of Flash ROM in the
Main Controller Board is faulty.
2
PCL ROM write/read error
- Replace the Main Controller Board.
The write/read of PCL ROM in the Main
Controller Board is faulty.
E197
0
Printer engine communication error
Erroneous communication between
the Engine controller PCB and Main
Controller Board was detected.
- Check the connectors of the Engine
controller PCB and Main Controller
Board.
- Replace the Engine controller PCB
for normal connection.
- Replace the Main Controller Board.
E716
0
Erroneous communication with optional cassette
Disconnection of the optional cassette
was detected after power-on, detection
of normal connection to the optional
cassette, and start of communication.
- Check the connectors of the optional
cassette PCB and Engine controller
PCB.
- Replace the optional cassette PCB
for normal connection.
- Replace the Engine controller PCB.
E730
0
inside error of the Main Controller Board
(PDL system error)
- Replace the Main Controller Board.
The inside of the Main Controller Board is faulty.
E733
0
Erroneous communication between controller and printer
Cannot communicate with the printer at
startup.
- Check the connectors of the Engine
controller PCB and Main Controller
Board for normal connection.
- Check the power supply of the
printer (Check whether initialization is
performed at startup).
- Replace the Engine controller PCB
or Main Controller Board.
E736
0
CCU communication error
The installed modem PCB is
incompatible.
- Check the connectors of the Main
Controller Board and modem.
- Replace the modem PCB.
- Replace the Main Controller Board.
E739
0
Erroneous communication between controller and network board
The installed network board is
incompatible.
- Replace the Main Controller Board.
E805
0
Fan failure
The fan is faulty.
- Check the fan connector.
- Replace the fan.
- Replace the Engine controller PCB.
