8
8
8-7
8-7
Service Mode > Service Soft Switch Settings (SSSW) > SSSW-SW03 > Detailed Discussions of Bit 7
Service Mode > Service Soft Switch Settings (SSSW) > SSSW-SW03 > Detailed Discussions of Bit 7
Service Soft Switch Settings (SSSW)
Outline
Bit Switch Composition
The items registered and set by each of these switches comprise 8-bit switches. The figure
below shows which numbers are assigned to which bits. Each bit has a value of either 0 or 1.
001
#SSSW
0 0 0 0 0 0 0 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Do not change service data identified as "not used"; they are set as initial settings.
SSSW-SW01:
List of Functions
Bit
Function
1
0
0
service error code
output
not output
1
not used
-
-
2
not used
-
-
3
not used
-
-
4
not used
-
-
5
not used
-
-
6
not used
-
-
7
not used
-
-
Detailed Discussions of Bit 0
Selects whether or not service error codes are output.
When output is selected, service error codes is report.
■
■
■
F-8-2
F-8-2
T-8-17
T-8-17
SSSW-SW03
List of Functions
Bit
Function
1
0
0
not used
-
-
1
not used
-
-
2
not used
-
-
3
not used
-
-
4
not used
-
-
5
not used
-
-
6
not used
-
-
7
tonal signal before CED signal
transmission
transmit
do not transmit
Detailed Discussions of Bit 7
Use it to enable/disable transmission of a 1080-Hz tonal signal before transmission of the
CED signal.
Select 'transmit' if errors occur frequently because of an echo when reception is from
overseas.
MEMO:
Any of the following error code may be indicated because of an echo at time of
reception
##0005, ##0101, ##0106, ##0107, ##0114, ##0200, ##0201, ##0790
■
■
T-8-18
T-8-18
