Canon Color Network UFR Printer Kit-C1, Service Manual

Page: 95 / 122

Chapter 4
4-18
4.4 Related Service Mode
4.4.1 Related Service Modes List
0008-4680
Following is an overview of the service modes related to the SEND function.
Preconditions:
- These service modes are found in COPIER>OPTION>BODY.
- All are Level 2 service modes.
- Service modes marked with an asterisk (*) are new service modes.
T-4-10
Device Error Previous restore result ended on an error on
the iR device side Error caused by the iR device
Device turned off during restore processing
Workspace memory allocation failure
Hard drive write failure
Item Setting
name Description
I-Fax reception raw data print RAW-
DATA 0: Ordinary reception mode(default)
1: Received I-Fax content printed out as is (in order to judge
whether data are correct).
I-Fax reception output line count
limit IFAX-LIM When large volume data (error mail, etc.) are received via I-Fax,
the output line count is restricted (default: 500).
NB: If the setting is 0, there is no restriction.
No limitation on file size for I-Fax
serverless transmission. IFAX-SZL* 0: Enables Limitation on file size for serverless transmission.
1: Disables Limitation on file size for serverless transmission.
Divided page transmission in I-Fax
simple mode IFAX-PGD* 0: Does not allow divided page transmission in I-Fax simple mode
1: Allows divided page transmission in I-Fax simple mode
SMTP transmission port number SMTPTXPN TCP port number used by SMTP transmission (default:25)
SMTP reception port number SMTPRXP
N TCP port number used by SMTP reception (default:25)
POP3 port number POP3N TCP port number used by POP (default:110)
FTP transmission port number FTPTXPN TCP port number used by FTP transmission (default:25)
CRAM-MD5 authentication
restrictions with SMTP / POP
AUTH authentication NS-CMD5* 0: Permit CRAM-MD5 authentication when performing SMTP /
POP AUTH authentication. (Default)
1: Prohibit CRAM-MD5 authentication when performing SMTP
authentication.
NTLM authentication restrictions
with
SMTP / POP AUTH authentication NS-
NTLM5* 0: Permit NTLM authentication when performing SMTP / POP
AUTH authentication. (Default)
1: Prohibit NTLM authentication when performing SMTP / POP
AUTH authentication.
GSSAPI authentication restrictions
with SMTP / POP AUTH
authentication NS-GSAPI* 0: Permit GSSAPI authentication when performing SMTP POP
AUTH authentication. (Default)
1: Prohibit GSSAPI authentication when performing SMTP POP
AUTH authentication.
PLAIN, LOGIN authentication
restrictions with SMTP POP
AUTH authentication when
communication packets are
encoded NS-
PLNWS* When communication packets are encoded,
0: Permit PLAIN, LOGIN authentication when performing SMTP
POP AUTH authentication. (Default)
1: Prohibit PLAIN, LOGIN authentication when performing
SMTP POP AUTH authentication.
LOGIN authentication restrictions
with SMTP POP AUTH
authentication NS-LGN* 0: Permit LOGIN authentication when performing SMTP POP
AUTH authentication. (Default)
1: Prohibit LOGIN authentication when performing SMTP POP
AUTH authentication.
Restore Status
Messages