Canon Color Network UFR Printer Kit-C1, Service Manual

Page: 8 / 122

Chapter 1
1-1
1.1 Specifications
1.1.1 UFR II Printer Driver
0010-7471
The UFR II assigns print processing loads to the print driver and the print controller for high-speed, low-
cost outputs.
Advantages
- While the features are enhanced, the memory usage can be saved supporting both page and band descrip-
tions.
- Balancing the data processing loads of the driver and controller allows high-speed outputs.
T-1-1
Supported operating systems
T-1-2
The UFR II print driver requires 5.0 mm of the top, bottom, left, and right margins.
-Even if Print with Upper Left of Sheet as Starting Point option is selected, marginal areas of the data for
a page are missing in some print results. To solve this problem, adjust the scaling so that the data fit into
the printable area and print the data again.
Non-default paper:
T-1-3
0mm Mode
T-1-4
Specification
UFR II
Data processing 600/1200dpi
Effective print main scanning:2.5mm
sub scanning:Top 4.5mm, Bottom 2.5mm
Windows 2000 Professional/Server/Advanced Server
Windows XP Home Edition/Professional Edition(32 bit)
Microsoft Windows XP Professional x64 Edition (64 bit)
Microsoft Windows Server 2003 (32 bit)
Microsoft Windows Server 2003 x64 Edition (64 bit)
Mac OS X v10.2.8-V10.4.2
UFR II
Effective print area(mm) End of Paper(mm)
Main scaning Sub scaning Main scaning Sub scaning
Custom Size Minimum 90.00 138.00 5.00 5.00
Custom Size Maximum 287.00 422.00 5.00 5.00
Long sheet Minimum 90.00 423.00 5.00 5.00
Long sheet Maximum 287.00 622.00 5.00 5.00
0mm Mode
Effective print area(mm) End of Paper(mm)
Main scaning Sub scaning Main scaning Sub scaning
Custom Size Minimum 95.00 141.00 2.50
Top 2.50
Bottom 2.50
Custom Size Maximum 292.00 425.00 2.50
Top 2.50
Bottom 2.50
Long sheet Minimum 95.00 426.00 2.50
Top 2.50
Bottom 2.50
Long sheet Maximum 292.00 623.00 2.50
Top 2.50
Bottom 2.50