Canon Color Network UFR Printer Kit-C1, Service Manual

Page: 84 / 122

Chapter 4
4-7
<Memo>
This model does not have an E-Mail reception function, only an error mail reception function. Therefore,
it can only print out text and i-Fax compliant TIFF attachments. PDF and JPEG files cannot be printed out.
4.3.2 I-Fax Transmission errors
0008-4682
<I-Fax transmission error message and error codes>
#810, #813, #839, #841, #842, #843, #844, #845, #846 are new error codes.
T-4-2
No display #899 Operation completed
normally. This error code indicates that transmission as far as the SMTP
server was completed normally, but delivery cannot be
confirmed. Except when delivery confirmation is performed
in I-Fax Full mode, confirmation is displayed on the I-Fax/E-
Mail transmission side. The only way to judge whether
transmission has been completed normally is to see whether
there has been an error mail reception printout.
Cancelled. #995 Transmission cancelled - Retransmit as necessary.
Message Error code Cause Remedy
No display #022 Address deleted or
invalidated during
transmission reservation. - Retransmit deleted address.
- Check that a group address is specified as the transfer
destination and that it contains a valid address.
- Check that a group address is specified as the transfer
destination and whether it contains local print or fax box
only.
- Check whether the specified transfer destination
address has been deleted.
No display #099 A user canceled the
transmission. - Send the data again.
The number of
transmission
standby documents
must be reduced. #702 HD full (work area) - Wait a while then retry.
- Stop broadcast transmission with other protocols.
The number of
transmission
standby documents
and BOX
documents must be
reduced. #703 HD full (work area) - Wait a while then retry.
- Stop broadcast transmission with other protocols.
- Delete documents from the BOX to free up HD space.
The address is not
in the address list. #704 Address book search
error. - Check the address book settings.
Data size too big. #705 Transmission data size
too big. - Reduce number of pages for transmission or lower
resolution.
- Image data size for one page has exceeded the user
mode setting.
- Reset user mode transmission upper limit.
Address table not
available. #706 Remote UI or other
transmission components
using address book, so it
cannot be referenced. - Wait a while then retry.
No connection #752 DNS/SMTP server
setting error (SMTP
connection error) - Reprogramme the user mode settings. (domain name,
E-Mail address, DNS, mail server)
- Check that the SMTP server is operating properly.
No response #753 Network error(Socket
Write,Selecterror,etc.) Check cable and connectors.
Message Error code Cause Remedy