manualshive.com logo in svg

Canon Color Network UFR Printer Kit-C1, Service Manual

Share
Download
Canon Color Network UFR Printer Kit-C1 Service Manual Download Page 26

Chapter 2  

2-10

2.2 Changed Function

2.2.1 Device Settings

0011-3467

In order to check if each option is set correctly, click a tab of 'Device Settings' on the properties screen of
printer driver.

F-2-15

F-2-16

How to select [Perfect Binder-A1] and [Document Insertion Unit-C1]:

-Deviced Settings>Function>Device Function Settings_Function Version then 2.0 or later.
-Back to Deviced Settings then press Apply.
-Select Perfect Binder-A1 and Document Insertion Unit-C1.

Specification:

- If Finisher-V1/V1L is checked Sddle Finisher-V2/V2L is disabled, and vice versa.
- Pper Folding Unit-D1 and Punch will only be enabled Finisher-V1/V1L or Saddle Finisher-V2/V2L is
checked
- Trimmer will only be enabled if Saddle Finisher-V2/V2L is checked.
- Punch will only be enabled Finisher-V1/V3 or Saddle Finisher-V2/V2L is checked.
- If(Saddle)FinisherV1/V2/V1L/V2L is cheked, Document Insertion Units-C1 is enabled but uncheked.
- If Perfect Binder-A1 is checked, Document Insertion Units-C1 is enabled but uncheked.

Summary of Contents for Color Network UFR Printer Kit-C1



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands