Canon Color imageRUNNER LBP5280 Service Manual Download Page 7

Page: 7 / 284

0-3

Actions to be taken when E616 is displayed. ---------------------------------------2-69
MEAP Safe Mode --------------------------------------------------------------------------2-70
Using USB Devices -----------------------------------------------------------------------2-71

Reference material ---------------------------------------------------------------2-72

Glossary --------------------------------------------------------------------------------------2-72

Embedded RDS ------------------------------------------------------------- 2-75

Product Overview -----------------------------------------------------------------2-75

Overview -------------------------------------------------------------------------------------2-75
Features and benefits --------------------------------------------------------------------2-75

Service cautions -------------------------------------------------------------------2-75
E-RDS Setup -----------------------------------------------------------------------2-76

Confirmation and preparation in advance -------------------------------------------2-76
E-RDS setting items (service mode) --------------------------------------------------2-76
Steps to E-RDS settings -----------------------------------------------------------------2-77
Initializing E-RDS settings ---------------------------------------------------------------2-79

FAQ -----------------------------------------------------------------------------------2-80
Troubleshooting -------------------------------------------------------------------2-81
Error code and strings -----------------------------------------------------------2-83

3 Disassembly/Assembly

Outline ---------------------------------------------------------------------------3-2

List of Parts ---------------------------------------------------------------------3-3

External Cover/Internal System ----------------------------------------- 3-12

Layout Drawing --------------------------------------------------------------------3-12
Removing the Rear Cover ------------------------------------------------------3-13

Procedure ------------------------------------------------------------------------------------3-13

Removing the Rear Cover Rib Unit ------------------------------------------3-13

Preparation ----------------------------------------------------------------------------------3-13
Procedure ------------------------------------------------------------------------------------3-13

Removing the Rear Upper Cover (Left) -------------------------------------3-14

Procedure ------------------------------------------------------------------------------------3-14

Removing the Rear Lower Cover ---------------------------------------------3-15

Preparation ----------------------------------------------------------------------------------3-15
Procedure ------------------------------------------------------------------------------------3-15

Removing the Right Cover -----------------------------------------------------3-16

Procedure ------------------------------------------------------------------------------------3-16

Removing the Left Cover -------------------------------------------------------3-17

Preparation ----------------------------------------------------------------------------------3-17
Procedure ------------------------------------------------------------------------------------3-17

Removing the USB Cover ------------------------------------------------------3-18

Procedure ------------------------------------------------------------------------------------3-18

Removing the Upper Cover ----------------------------------------------------3-19

Preparation ----------------------------------------------------------------------------------3-19
Procedure ------------------------------------------------------------------------------------3-19

Removing the Front Cover -----------------------------------------------------3-20

Preparation ----------------------------------------------------------------------------------3-20
Procedure ------------------------------------------------------------------------------------3-20

Controller System ----------------------------------------------------------- 3-22

Layout Drawing --------------------------------------------------------------------3-22
Removing the Main Controller PCB ------------------------------------------3-24

When Replacing the Main Controller PCB ------------------------------------------3-24
Preparation ----------------------------------------------------------------------------------3-25
Procedure ------------------------------------------------------------------------------------3-25

Removing the Right Frame Cover --------------------------------------------3-27

Preparation ----------------------------------------------------------------------------------3-27
Procedure ------------------------------------------------------------------------------------3-27

Removing the Right Upper Frame Unit --------------------------------------3-29

Preparation ----------------------------------------------------------------------------------3-29
Procedure ------------------------------------------------------------------------------------3-29

Removing the Main Controller Support Plate ------------------------------3-31

Preparation ----------------------------------------------------------------------------------3-31
Procedure ------------------------------------------------------------------------------------3-31

Removing the Main Drive Unit -------------------------------------------------3-32

Preparation ----------------------------------------------------------------------------------3-32
Procedure ------------------------------------------------------------------------------------3-32

Removing the Duplex Reverse Drive Unit ----------------------------------3-35

Summary of Contents for Color imageRUNNER LBP5280





























































































































































































































































































Search results

Summary of Contents for Color imageRUNNER LBP5280

Reviews:

Canon Color imageRUNNER LBP5280, Service Manual, Page: 7 / 284

Search results

Summary of Contents for Color imageRUNNER LBP5280

Reviews: