Canon Color imageRUNNER LBP5280, Service Manual, Page: 140 / 284

3
3
3-37
3-37
Disassembly/Assembly > Controller System > Removing the SD Slot PCB > Procedure
Disassembly/Assembly > Controller System > Removing the SD Slot PCB > Procedure
2) Disconnect the Flat Cable [1] from the Harness Guide [A].
• 1 Connector [2]
3) Put the Flat Cable [1] through the hole [B] of the Upper Cover, and remove the Control
Panel Unit [3].
• 1 Screw [4]
• 2 Claws [5]
• 2 Hooks [6]
[1]
[2] [A]
[1] [B] [5]
[5]
[4] [3] [6]
x2
CAUTION:
Be sure to put the Flat Cable [1] first through the hole [B] when installing.
[1]
[B]
F-3-71
F-3-70
Removing the SD Slot PCB
■
Preparation
1) Remove the Right Cover.(Refer to page 3-16)
2) Remove the Operation Panel Unit.(Refer to page 3-36)
3) Remove the Rear Upper Cover (Left).(Refer to page 3-14)
4) Remove the USB Cover.(Refer to page 3-18)
5) Remove the Upper Cover.(Refer to page 3-19)
■ Procedure
1) Remove the Flat Cable Guide Cover Plate [1].
• 1 Screw [2]
2) Remove the Main Controller Shield Plate [3] and the Flat Cable Guide [4].
• 5 Screws [5]
• 1 Hook [6]
x6
[1]
[2]
[3]
[4]
[6]
[5]
[5]
[5]
F-3-72