Canon C5000 - MultiPASS Color Inkjet Printer, User Manual

Page: 129 / 276

5-10 Receiving Faxes Chapter 5
How DRPD Responds to Calls
When there is an incoming call, the MultiPASS C5000 checks the
incoming ring pattern and determines the type of pattern being
received. The MultiPASS C5000 may require up to 10 seconds to
determine the pattern type. During this time, any telephone device
connected to the MultiPASS C5000 will not ring if Silent Receive is
enabled. After the pattern is detected, the MultiPASS C5000 reacts
according to how you registered the setting.
Incoming Call Incoming Call
Your Setting From Fax From Telephone
Fax Receives the fax document Answers as a fax
without ringing. machine.
Tel Rings to alert you to pick Rings to alert you to pick
up the telephone. Press up the telephone and
START/COPY
to receive the take the call.
fax (Manual Mode).
Fax/Tel Switches to receive mode Rings to alert you to pick
for fax transmission signals up the telephone and
and does not ring. take the call.
Communicating Using the Distinctive Ring Pattern
Detection (DRPD) Feature
Using the MultiPASS C5000 with a DRP service is almost the same
as using it with a normal telephone line.
When you turn on DRPD, the Receive Mode defaults to Fax/Tel Mode.
(You cannot change this Receive Mode.)
When someone calls using the number assigned for telephone
communication, the MultiPASS C5000 rings in the pattern you
registered for telephone calls. When you hear this pattern, simply pick
up the telephone connected to the MultiPASS C5000 and talk.
If you do not pick up the telephone, the MultiPASS C5000 continues
to ring until the other party hangs up.
When someone sends a fax using the number assigned for fax
communication, the MultiPASS C5000 does not ring. It receives the
document automatically.