Canon C12-8453, Service Manual

Page: 35 / 271

12-6 Effective range:
12-7 Reception setting Film advance lever set to Self-timer/Remote control.
method:
12-8 Operation indicator: (1) Immediate shutter release signal reception: The
red-eye reduction lamp blinks once when the picture
is taken.
(2) 2-sec. delay signal reception:
The red-eye reduction lamp lights for 2 sec. a countdown of “2, 1” is
displayed on the LCD panel, and the beeper sounds at 8 Hz.
* Beeper sounds only when enabled by the Func. setting.
(Sequence: Remote control signal received, AF, metering,
and exposure.)
12-9 Cancellation: No operation by the user for 4 minutes cancels the
Remote control setting automatically.
* Setting restored when the user touches the camera controls.
12-10 Misc.: For bulb exposures, the remote control signal reception
can start the exposure immediately or after a 2-sec.
delay. When the signal is received again, the bulb
exposure stops.
13. Major Accessories
13-1 New accessories: (1) SPEEDLITE 420EX
(2) BATTERY PACK BP-300
(3) Wide Strap EW-100BK
(4) Semi Hard Case EH-14L
13-2 Major EOS System See “Accessory Compatibility Tables.”
accessories:
14. Other Specifications
14-1 Film transport testing conditions (General-purpose shooting test)
1. Batteries: CR123A 2
2. Lens: EF 50mm f/1.4 USM
3. Picture-taking mode: Shutter speed-priority AE (at
1/1000 sec.)
4. Subject brightness: EV 15
5. AF mode: One-Shot AF
6. Eye Control: Activated
7. Film advance mode: Continuous
8. Film rewind mode: Silent
9. Film: Kodak Tri-X, 36-ex. (fresh roll)
Part 1: General Information
1-28
Effective Range (Official)
Approx. 5 m
Approx. 3.5 m
Transmission Angle
1. Front and center
2. 25º angle from the film plane