manualshive.com logo in svg

Canon C12-8453, Service Manual

Share
Download
Canon C12-8453 Service Manual Download Page 190

1.20 D

ATA

T

RANSFER

The Data Transfer menu consists of five operations:

1. Initialization:

This is divided into initialization of all data, AF data or
settings. Select the required item to initialize as
required.

2. Data storage:

All data, AF data and settings can be selected.

3. Data transfer:

Same as data storage

4. Temperature compensation: Stores the temperature compensation value in the

camera. Temperature compensation for each of the AE
sensor, TTL sensor and AF sensor is performed. (This
value corrects for any error in the camera’s internal
temperature.)

5. Film counter reset:

Resets the film counter.

Select Data Transfer in the MAIN MENU
to display the Data Transfer menu.

Part 4: Electrical Adjustment

4-42

 DATAMENU

Select with cursor keys and press RETURN.

Press space bar to return to Main Menu.

Initialization/Data Transfer

F1  Initialization Menu

F2  Data Transfer Menu

F3  Temperature Compensation

F4  Film Counter Reset

Summary of Contents for C12-8453
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands