Canon C12-8453, Service Manual

Page: 185 / 271

E
RROR
C
ODE
D
ISPLAY
ON
AND
OFF M
ODE
If an error occurs in the normal camera
mode battery mark only flashes and you
cannot tell which error has occurred. If
the “error code display ON and OFF
mode” is set, error codes are displayed at
the top right of the camera’s external
LCD panel.
When [F2] is selected in the Self Check
menu, the screen on the right appears,
and the “error code display ON and OFF
mode” is set.
To cancel this mode, select [F2] again.
This mode can also be canceled by
selecting [F10] Quit in the Main menu.
E
RROR
C
ODE
D
ELETION
This deletes the error code. If there is a
non-repeating malfunction, deleting the
error code will serve as reference
information the next time the camera is
serviced.
On the Self-Check menu, select [F2]
Error Code Deletion. The screen on the
right will then appear. Press Return to
delete the error code.
Part 4: Electrical Adjustment
4-37
ERRORON
Error cord display mode will be set.
Cancel Error code display mode before returning
the camera to the user. To cancel the mode,
select 'Error Code Display' again.
Press RETURN to return to Self Check Menu.
Error Cord Display
: Be sure to cancel error code display when returning the camera to the user.
9 NOTE
ERROR_C1
Error Code Deletion
Error Code will be deleted.
Deleting error code will be helpful to next repair
when the problem is not repetitive.
Press RETURN to terminate the software.
Press SPACE bar to delete the error code.