54
Appendix
4.
Read the License Agreement, then click
Yes
if you agree.
5.
When the main menu appears, make sure that the Printer Driver is
highlighted, then click
Install.
The printer driver will load automatically.
6.
When prompted, TURN ON the printer so the printer port (connection) can be
automatically detected. When the printer port has been identified, click
OK
.
7.
When the Terminate Installation dialog box appears, click
OK
.
8.
Register your product by following the on-screen instructions.
9.
Proceed to install the Application. Follow the on-screen instructions. This may
take a few minutes.
10.
When the installation process has completed, you can view any electronic
documentation. If you do not wish to at this time, click
Exit.
11.
Click
Yes
if you are prompted to restart the computer.
To install the printer driver in Mac OS:
1.
Prepare your Mac (if needed).
•
If you have multiple users set up in OS 9, log in as the Owner.
•
To install the printer on a network, see the
S820 User’s Guide
on the Setup
Software & User’s Guide CD-ROM.
2.
Close any open software applications.
3.
Insert the S820 Setup Software & User’s Guide CD-ROM in the CD-ROM drive.
4.
Open the printer driver folder on the CD-ROM.
5.
Double-click the
Installer
icon.
If the setup program does not run automatically, click
Start,
then
Run
,
then
type
D:\msetup.exe
(where
D
is the CD-ROM drive).
If a message prompts you to restart Windows, remove the
CD-ROM, then click
OK
. After the computer restarts, re-insert the
CD-ROM and continue.
If your computer cannot detect a printer port, see the
troubleshooting tip for “Computer cannot detect a printer port”
on page 45.
S820QSG.book Page 54 Thursday, October 18, 2001 1:41 PM
