Basic Printing
11
To load envelopes:
1.
Set the paper thickness lever to the right,
towards the envelope mark.
2.
Slide the paper feed guide completely to
the left.
3.
Press down on the corners and sides of the
envelopes to make them as flat as possible by
expelling all of the air in them. To avoid paper
jams, make sure the envelopes are flat before
you load them into the sheet feeder.
4.
With the address side facing up and pointed
down, align the stack with the right side of
the sheet feeder, then insert the stack into
the printer.
5.
Slide the paper guide right to the edge of
the envelope.
Cancelling a Print Job
You can cancel a print job in progress in several ways:
To cancel a print job using the printer buttons:
After a print job has started, press the
RESUME/CANCEL
button
on the printer. The print job
will be cancelled.
•
If the edges of the envelopes are not sharp, crease them with the
side of a pen. Make sure that none of the flaps are overlapping.
•
You can load up to 10 standard #10 envelopes in the sheet feeder.
Paper thickness lever
RESUME/CANCEL button
S820QSG.book Page 11 Thursday, October 18, 2001 1:41 PM
