Canon BJC-8000 User Manual Download Page 31 | Manualshive

Page: 31 / 44

background image

31

T

roubleshooting

Troubleshooting

■

“Error writing to LPT1” displayed.

An error message appears.

Cause

The printer is not switched on.

The printer and the PC are not
connected properly.

Printer cable fault.

Switching device or external buffer
fault.

The print spool is not operating
correctly.

Printer port (LPT1) fault.

There is a problem with the installed
printer driver.

A WPS driver is installed on the PC.

Solution

Check that the printer’s POWER lamp is on.

If the POWER lamp is blinking rapidly, the printer is warming up
(initializing). Wait until the lamp lights steadily.

Ensure that the power cord and printer cable are securely
connected.

Refer to the “Quick Start Guide” instructions provided with the printer.

Use another cable.

Contact the cable supplier for more information on cable faults.
Make sure you are using an IEEE-compatible parallel cable.

Disconnect the switching device or external buffer and print with
the printer directly connected to the PC.

If you can then print normally, the fault is probably in the switching
device or external buffer. Consult the switching device or external buffer
supplier.

Change the print spool setting.

Open the printer driver Printer Properties window, click Spool settings on
the Details tab and select “Send print data direct to the printer”.

Check the status of the printer port.

Click on Start, Settings, and Control Panel. Double-click on the Device
Manager tab, double-click Ports (COM & LPT). Double-click Canon BJ
ECP Printer Port (LPT1). The Device status should read “This device is
working properly.

Remove the installed BJ printer driver and then install the printer
driver again.
<Uninstalling the printer driver>

Select Programs and then BJ Printer from the Windows Start menu and
click Uninstall. Then follow the on-screen instructions.

Change the WPS driver port setting to FILE or delete the WPS
driver.

To change the port setting, open the WPS Windows Printing System
Driver Properties window. On the Detail tab, select FILE in the Print to
Port... setting.
To delete the WPS driver, Select Programs and then BJ printer from the
Windows Start menu and click Uninstall. Then follow the on-screen
instructions.

➡

➡

➡

➡

➡

➡

➡

➡

«
...
29
30
31
32
33
...
»

Summary of Contents for BJC-8000













































Reviews:

No comments

Related manuals for BJC-8000

Brand: CAB Pages: 263

Brand: QMS Pages: 160

Brand: QMS Pages: 110

Brand: QMS Pages: 158

Brand: CAB Pages: 144

Brand: GCC Technologies Pages: 14

Brand: TallyGenicom Pages: 310

Brand: TallyGenicom Pages: 330

Brand: Xerox Pages: 11

Brand: Xerox Pages: 30

Versant 4100 Press

Brand: Xerox Pages: 68

Brand: Xerox Pages: 4

Brand: Xerox Pages: 4

Brand: Xerox Pages: 2

Versant 2100 Press

Brand: Xerox Pages: 68

Brand: Canon Pages: 30

Brand: Canon Pages: 21

Brand: Canon Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands