![background image](http://html.mh-extra.com/html/canon/bjc-6000-series/bjc-6000-series_user-manual_61790086.webp)
An Error Message Appears
Printing does not start due to an error writing to LPT1
Printer is not on
Check the
POWER
light
The
POWER
light should be green. If the
POWER
light is
flashing, the printer is warming up.
Printer cable not
Check the parallel cable
connected correctly
Make sure the parallel cable is securely fastened to the
computer and the printer. See the Quick Start Guide for
details.
Printer cable fault
Try to use another printer cable
Make sure the cable is an IEEE 1284-compatible
parallel interface cable.
Another device is
Check the LPT1 port
connected to LPT1
Make sure the printer is connected to LPT1.
Switching device or
Check the switching device or external buffer
external buffer fault
Disconnect the switching device or external buffer and
print with the printer connected directly to the
computer. If you can then print normally, the fault is
probably in the switching device or external buffer.
Consult the switching device or external buffer
supplier.
5-6
Troubleshooting
Chapter 5
Summary of Contents for BJC-6000 Series
