Click one of the option buttons.
To clean the print heads on both
BJ cartridges, select All Colors.
To clean only the print heads of
the Black BJ Cartridge, choose
Black.
To clean only the print heads
of the Color BJ Cartridge,
select Color.
Click Execute and follow the
instructions on the screen.
When print head cleaning
begins, the
POWER
light starts
flashing. Print head cleaning
requires about 30 seconds to
complete. Wait for the
POWER
light to stop flashing before you
resume normal operation.
To check the print head performance, print the Nozzle Check Pattern (see
page 4-5).
If the results of the Nozzle Check Pattern are not satisfactory, check the BJ Printer
Status Monitor for a low ink warning or remove the BJ tanks and visually check
the ink levels in the tanks. If there is ink in all of the BJ tanks, execute print head
deep cleaning (see page 4-9).
You can also start print head cleaning with the
RESUME
button on the printer.
Press and hold the
RESUME
button until you hear one beep and then release it.
This cleans the print heads of all colors at one time.
Perform the print head cleaning only when you encounter a print quality
problem. Unnecessary and repetitious cleaning will waste ink.
If you execute the print head cleaning while paper is manually loaded, the printer
will eject the paper and then perform the cleaning.
4-8
Maintaining the Printer
Chapter 4
CLICK
HERE
Summary of Contents for BJC-6000 Series
