Canon 8582A001 - i 80 Color Inkjet Printer Quick Start Manual Download Page 50

Page: 50 / 84

Printing Maintenance

Aligning the Print Head

If ruled lines are printed misaligned, adjust the print head position.

With the printer on, load a sheet of Letter paper in the printer.

Move the paper thickness lever to the right position.

Open the Printer Properties dialog box.

See "O

Opening the Printer Properties Dialog Box Directly from the Start Menu" on

page 22.

Print the pattern.

(1)

Click the M

Maintenance tab.

(2)

Click P

Print Head Alignment.

(3)

Click P

Print Head Alignment.

When the confirmation message is
displayed, click O

OK.

The Pattern will be Printed.

Note

Click C

Check Setting to

print the current
setting and finish the
operation.

(4)

After the pattern is printed, click Y

Yes.

US_i80_QSG.book Page 46 Friday, October 10, 2003 3:25 PM

Summary of Contents for 8582A001 - i 80 Color Inkjet Printer





















































































Search results

Summary of Contents for 8582A001 - i 80 Color Inkjet Printer

Reviews:

Related manuals for 8582A001 - i 80 Color Inkjet Printer

Brands by name

Popular brands

Canon 8582A001 - i 80 Color Inkjet Printer, Quick Start Manual

Search results

Summary of Contents for 8582A001 - i 80 Color Inkjet Printer

Reviews:

Related manuals for 8582A001 - i 80 Color Inkjet Printer

Brands by name

Popular brands