Canon 3300 Series Manual Download Page 60

Page: 60 / 235

Various Dialing Methods

2-28

Basic F

ax Usage

Press the One-touch Speed Dialing key stored as a Group Dial, and press “Done.”

To specify two or more Group Dials, press them all, and press “Done.”

To specify two or more destinations using Redial, Coded Speed Dialing,
or

(numeric keys), press “Next” to consecutively specify the destinations. When

using One-touch Speed Dialing, press “Address Book”

→

specify the destination

→

press

“Done.”

NOTE
•

To cancel the destination specified from the Address Book, press the One-touch Speed
Dialing key again.

•

To use Group Dialing, you must first perform registration for Group Dialing. See ‘Registering
Group Dialing Destinations,’ on p. 5-22.

Send the document in the usual way.

For details, see ‘Sending a Fax,’ on p. 2-2.

Index.book Page 28 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 3300 Series












































































































































































































































Search results

Summary of Contents for 3300 Series

Reviews:

Canon 3300 Series, Manual, Page: 60 / 235

Search results

Summary of Contents for 3300 Series

Reviews: