Canon 3300 Series Manual Download Page 204

Page: 204 / 235

Printing Registered and Set Contents

7-8

inting Comm

unication Repor

ts and F

ax Function Settings

Printing Registered and Set Contents

You can print the registered and set contents of the custom Fax settings. In particular, you
can print the following lists:

• Address Book List 1: Prints a list of One-touch Speed Dialing destinations.

• Address Book List 2: Prints a detailed list of One-touch Speed Dialing destinations.

• Group Destination List: Prints a list of Group Dialing destinations.

• User’s Data List: Prints all the set contents of the custom Fax settings.

NOTE
•

For an example of each list, see ‘Appendix,’ on p. 9-1.

Call up the desired screen as follows:

Press the item to be printed.

Pressing “

▲

” or “

▼

” displays the prior or subsequent screen.

A confirmation message screen appears.

(Additional
Functions)

(Print List)

Index.book Page 8 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 3300 Series












































































































































































































































Search results

Summary of Contents for 3300 Series

Reviews:

Canon 3300 Series, Manual, Page: 204 / 235

Search results

Summary of Contents for 3300 Series

Reviews: