Canon 3300 Series Manual Download Page 158

Page: 158 / 235

File Settings

5-44

Setting and Stor

ing Custom F

ax Settings

File Settings

This section describes the method of registering and setting the memory box.

In order to use a memory box, it is necessary to set and store each item in the memory box
in advance.

IMPORTANT

•

Subaddresses are used to distinguish one memory box from another.

•

The subaddresses in the memory boxes in this machine cannot be set to the same value.

NOTE
•

Communication with a memory box is done using an ITU-T standard subaddress and RX password.

•

Regarding the method of using memory boxes, subaddresses, and RX passwords, see
‘Communications Using the Subaddress (Subaddress),’ on p. 2-34.

•

You can store up to 50 memory boxes.

Index.book Page 44 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 3300 Series












































































































































































































































Search results

Summary of Contents for 3300 Series

Reviews:

Canon 3300 Series, Manual, Page: 158 / 235

Search results

Summary of Contents for 3300 Series

Reviews: