Canon 3300 Series Manual Download Page 51

Page: 51 / 235

Various Dialing Methods

2-19

Basic F

ax Usage

Various Dialing Methods

This machine provides you with four ways to specify the faxing destination:

■

Specifying Destinations Using Numeric Keys
Specify one or more destinations using

(numeric keys).

■

Specifying the Last Destination Dialed Using Numeric Keys
Specify the last destination that was dialed using

(numeric keys) by using

“Redial” on the Fax Basic Features screen.

■

Specifying with Coded Speed Dialing
Specify one or more destinations using the Coded Dialing Number by using “Coded
Dialing” on the Fax Basic Features screen.

■

Specifying with the Directory
Specify the destination by using “Address Book” on the Fax Basic Features screen.

Specifying Destinations Using Numeric Keys

Dial the number of the other party using

(numeric keys) on the control panel. You

can also dial several numbers in succession and send the original to several destinations in a
single operation.

Place your originals.

For instructions explaining how to set the original, see ‘Sending an Original,’ on p. 2-7.

Make sure the machine is ready to send, and enter the other party’s
number using

(numeric keys).

Index.book Page 19 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 3300 Series












































































































































































































































Search results

Summary of Contents for 3300 Series

Reviews:

Canon 3300 Series, Manual, Page: 51 / 235

Search results

Summary of Contents for 3300 Series

Reviews: