Canon 0273B001 - Elura 90 Camcorder Page 97 Instruction Manual Download

Page: 97 / 160

Usin

a Memo

Using the Flash

You can use the built-in flash for recording still images in dark places. The flash is
equipped with the red-eye reduction mode.

Selecting the Flash Mode

Press the (flash) button.

• The setting changes with each press of the button.
• The symbol of the selected flash mode appears on the screen.

“

” disappears after 4 seconds.

(auto)

The flash fires automatically according to the brightness
of the subject.

(red-eye reduction, auto)

The flash fires automatically according to the brightness
of the subject and the assist lamp lights up to reduce
the red-eye effect.

(flash on)

The flash always fires.

(flash off)

The flash does not fire. Use this setting in places where
flash photography is prohibited.

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

PHOTO button

Flash

(flash) button

Assist lamp

Summary of Contents for 0273B001 - Elura 90 Camcorder

































































































































































Search results

Summary of Contents for 0273B001 - Elura 90 Camcorder

Reviews:

Related manuals for 0273B001 - Elura 90 Camcorder

Brands by name

Popular brands

Canon 0273B001 - Elura 90 Camcorder, Instruction Manual

Search results

Summary of Contents for 0273B001 - Elura 90 Camcorder

Reviews:

Related manuals for 0273B001 - Elura 90 Camcorder

Brands by name

Popular brands