Canon 0273B001 - Elura 90 Camcorder Page 118 Instruction Manual Download

Page: 118 / 160

118

Direct Printing

Printing Still Images

You can print still images by connecting the camcorder to a printer with direct print
function. You can also use the print order settings for direct printing (

127).

Following printers can be connected to your camcorder:

*Includes the CP-330/CP-220/CP-300/CP-200.

Connecting the Printer to the Camcorder

1. Turn off the camcorder and insert a memory card that contains still

images.

2. Turn on the printer.

3. Set the camcorder to CARD PLAY mode.

4. Connect the camcorder to the printer using the cable.

•

appears and changes to

when the printer is properly

connected to the camcorder. (Does not appear with movies, or still images that
cannot be played back with the camcorder.)

• The

(print/share) button lights up and the current print setting will be displayed

for approx. 6 seconds.

Canon Printers

PictBridge compliant SELPHY CP series
printer*/Bubble Jet Printers (PIXMA
series/SELPHY DS series)

Bubble Jet Direct compatible Bubble Jet
Printer

CP-10/CP-100 CP-Printer

PictBridge compliant non-Canon Printer

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

Printer with
direct print function

Summary of Contents for 0273B001 - Elura 90 Camcorder

































































































































































Search results

Summary of Contents for 0273B001 - Elura 90 Camcorder

Reviews:

Related manuals for 0273B001 - Elura 90 Camcorder

Brands by name

Popular brands

Canon 0273B001 - Elura 90 Camcorder, Instruction Manual

Search results

Summary of Contents for 0273B001 - Elura 90 Camcorder

Reviews:

Related manuals for 0273B001 - Elura 90 Camcorder

Brands by name

Popular brands