Canon 0273B001 - Elura 90 Camcorder Page 13 Instruction Manual Download

Page: 13 / 160

Bas

ic Fun

tio

Pr
ep
arat

ion
s

Basic Functions

Preparations

Preparing the Power Supply

Attaching the Battery Pack

1. Turn the POWER switch to OFF.

2. Move the viewfinder upward.

3. Attach the battery pack to the

camcorder.

• Remove the terminal cover of the

battery pack.

• Press lightly and slide it in the direction

of the arrow until it clicks.

Charging the Battery Pack

1. Connect the power cord to the

adapter.

2. Plug the power cord into a power

outlet.

3. Connect the power adapter to the

camcorder’s DC IN terminal.

The CHARGE indicator starts flashing. It
glows steadily when charging is complete.

4. When charging is complete,

disconnect the power adapter
from the camcorder. Unplug the
power cord from the power outlet
and disconnect it from the
adapter.

5. Remove the battery pack after use.

Press the BATTERY RELEASE button to remove the battery.

DC IN terminal

CHARGE indicator

Summary of Contents for 0273B001 - Elura 90 Camcorder

































































































































































Search results

Summary of Contents for 0273B001 - Elura 90 Camcorder

Reviews:

Related manuals for 0273B001 - Elura 90 Camcorder

Brands by name

Popular brands

Canon 0273B001 - Elura 90 Camcorder, Instruction Manual

Search results

Summary of Contents for 0273B001 - Elura 90 Camcorder

Reviews:

Related manuals for 0273B001 - Elura 90 Camcorder

Brands by name

Popular brands