148
Playback
Editing
Problem
Cause
Solution
Pressing the playback button
does not start playback.
Camcorder is turned off, or is
not set to PLAY (VCR) mode.
Set the camcorder to PLAY
(VCR) mode.
33
The TAPE/CARD switch is set
to CARD.
Set the TAPE/CARD switch to
TAPE.
33
Cassette is not loaded.
Load a cassette.
16
Tape reached the end
(“
END
” flashes on the
screen).
Rewind the tape.
33
Image will not appear on the
TV screen.
[AV/PHONES
] is set to
[PHONES
] in the menu.
Set [AV/PHONES
] to [AV]
in the menu.
36
[AV
DV] is set to [ON] in
the menu.
Set [AV
DV] to [OFF] in the
menu.
84
Tape is running, but image will
not appear on the TV screen.
TV/VIDEO selector on the TV
is not set to VIDEO.
Set the selector to VIDEO.
36
Video heads are dirty.
Clean the video heads.
142
You attempted to play back or
dub copyright protected tape.
Stop playback/dubbing.
–
No sound from the built-in
speaker.
Speaker volume is turned off.
Adjust the volume with the
SET dial.
35
Noise comes out of the
headphones.
[AV/PHONES
] is set to
[AV] in the menu.
Set [AV/PHONES
] to
[PHONES
] in the menu.
35
Problem
Cause
Solution
Dubbing via the camcorder's
DV terminal does not work.
[AV
DV] is set to [ON] in
the menu.
Set [AV
DV] to [OFF] in the
menu.
84
Wrong signal format.
Dubbing may work via the AV
terminal.
Refer also to the instruction
manual of the connected
device.
–
