Canature 485DF SIMTAN PLUS Series, Owner'S Manual

Page: 4 / 27

4
Specifications
•
The SIMTAN PLUS needs to be used on well water where the well is greater than 140 feet deep.
•
CALL CUSTOMER SERVICE TO DETERMINE CORRECT MODEL. WATER TEST RESULTS REQUIRED.
•
Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.
•
The manufacturer reserves the right to make product improvements which may deviate from the specifications and
descriptions stated herein, without obligation to change previously manufactured products or to note the change.
Specifications
SIMTANPLUS -
150
SIMTANPLUS -
200
SIMTANPLUS -
250
SIMTANPLUS -
300
Salt Used - Per Regeneration 9.0 lbs 12.0 lbs 15.0 lbs 18.0 lbs
Water Used - Regeneration 74.6 gal 98.9 gal 126.6 gal 153.0 gal
Hardness Removal - Grains 17,100 22,800 28,500 34,200
Advanced Exchange Media (ft3) 1.32ft
3
1.76 ft
3
2.20 ft
3
2.64 ft
3
Tank Size 10x54 12x52 13x54 14x65
Top Cone Yes Yes Yes Yes
Tank Jacket / Media Loaded Yes No No No
Brine Tank (Inches)
20.3 x 37.4 20.3 x 37.4 20.3 x 37.4 23.0 x 40.5
Salt Storage Capacity 350 lbs 350 lbs 350 lbs 420 lbs
Critical Service Flow Rate
4 - 6 gpm 6 - 8 gpm 8 - 10 gpm 10 - 12 gpm
Back Wash Flow Rate 2.4 gpm 4.0 gpm 5.0 gpm 7.0 gpm
Shipping Weight 141 lbs 158 lbs 198 lbs 244 lbs
Hardness
Maximum 45 gpg
Iron
Maximum 15 ppm
Manganese Maximum 3 ppm
Tannins Maximum 5 ppm / TOC 17 ppm
Ammonium
Maximum 4 ppm
pH 5 - 9
Other Free Chlorine < 1 ppm, TDS < 4000 ppm
Regeneration Type Down Flow
Plumbing Connections
Includes 3/4" 90°Elbows & 1" Straight NPT
Electrical Requirements Input 120V 60 Hz - Output 12V 650mA
Water Temperature Min 39 - Max. 100° F
Water Pressure Min. 20 - Max. 125 psi
Raw Water Quality Requirements and Efficiency of Purification
Parameters Influent limitations Max. Efficiency, %
Hardness 45 gpg 97
Iron* 4 ppm 98
Manganese 2 ppm 98
TOC** (including tannins) 3 ppm 98
Ammonium 4 ppm 90
*All installations require 5 micron pre - filter to be installed prior to this unit. We recommend our 10” or 20” Big Value
filter housings with a 5 micron cartridge. If ferric iron levels exceed 3ppm, or high volumes of sediment/turbidity is also
present, a regenerating nexsand or multi
- media filter should be installed prior to this unit. **TOC (total organic carbon)
is used as a measure of natural organic matter content
Do NOT use Pro
Res Care or other
media cleaners
with these units as
it will damage the
media