Can-Am MAVERICK Sport MAX Series, Operator'S Manual

Page: 69 / 187

SECONDARY CONTROLS
Work key
The work key allows for usage of 100%
of maximum engine torque but limits
vehicle speed to 40 km/h (25 MPH).
WARNING
On steep downhills, the engine
speed limiter may not prevent the
vehicle from accelerating beyond
this speed.
This key may be useful for riders who
prefer more gradual acceleration, or
for riding in environments where full
speed and high acceleration are not
desirable. For example, in narrow,
winding trails, operators may prefer
a normal key.
D.E.S.S. Flexibility
The D.E.S.S. of your vehicle can be pro-
grammed by your authorized Can-Am
dealer to accept up to 8 different keys.
If you have more than one D.E.S.S.
equipped Can-Am vehicle, each can
be programmed by your authorized
Can-Am dealer to accept the other ve-
hicle D.E.S.S. keys.
2) Headlight Dimmer
Switch
The headlight dimmer switch is lo-
cated on the upper console.
219002040-009
1. Headlight dimmer switch
This switch is used to select either the
headlights OFF position, low or high
beams.
3) 2WD/4WD Switch
The 2WD/4WD switch is located on
the upper console.
219002040-010
1. 2WD/4WD switch
This switch selects 2 wheel drive or 4
wheel drive mode when the vehicle is
stopped.
NOTICE
The vehicle must be
stopped to engage or disengage the
2WD/4WD switch. Mechanical dam-
age may occur if switch is engaged
or disengaged while driving.
The 4WD mode is engaged when the
switch is pushed upwards.
The 2WD mode is engaged when the
switch is pushed downwards. The ve-
hicle is then rear wheel drive only.
_______________
67